Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Daly City, CA | Silver Line Contractors
We provide independent Mr-Glass service across Daly City, handling shower enclosures, custom mirrors, glass partitions and railing systems, plus Mr-Glass repair in Broadmoor nearby. The one thing that makes our Mr-Glass work here different is this: we template and prepare for ground that moves. Daly City is built on wind-blown sand and old fill, and Mr-Glass panels installed on shifting hillside frames fail differently than anywhere else. Call (833) 400-1314 for a free estimate.
Noel Carvalho runs Silver Line Contractors with a straightforward approach to glass work: get the wall right before the glass goes in. We’re an independent trade partner, not a manufacturer-authorized dealer, which means we spec Mr-Glass parts for what your structure actually does. For Mr-Glass sales & service, we carry genuine OEM hardware where it’s still available and match quality equivalent glazing stock where it isn’t.
Why Daly City Residents Choose Us for Mr-Glass Service
Most glass shops in the Bay Area install to the opening on paper. The opening on paper is rarely the opening that exists in a 1950s Daly City hillside home after twenty winters of rain and shifting sand. We learned early from Noel’s years working every phase of residential builds across Santa Clara County that good work either holds or it doesn’t. So we shim, re-block, and level the wall before a single Mr-Glass panel gets templated.
Daly City homeowners deal with fog you can feel. The marine layer pushes condensation into hinge hardware and behind track seals, and by the second season you’re looking at calcium spotting and black mold creep. We spec Mr-Glass enclosures with drainage and seal details that account for that. As independent specialists, we’re not tied to a manufacturer’s script. If a seal failed, we repair the seal. If the panel edge is compromised or the frame is fighting a moving wall, we tell you honestly that replacement beats patching. That’s how we’ve built our name in Daly City, and it’s why homeowners call us when a Mr-Glass enclosure starts acting up.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Daly City
- Black mold creep behind track seals. The near-constant damp from Karl the Fog keeps Mr-Glass enclosure seals wet year-round. We replace failed seals with OEM or properly matched equivalents, and we adjust the curb slope so water doesn’t pool and feed the mold.
- Binding panels on moving walls. Mid-century stucco-over-wood-frame homes on Daly City’s sloped lots settle on wind-blown sand. A Mr-Glass panel that fit perfectly three years ago now binds on its pivot or delaminates the sweep seal. We re-template to the moving frame, not the nominal opening.
- Water pooling on bathroom curbs. Original galvanized plumbing and humid bathrooms mean the interior side of Mr-Glass panels carries a permanent moisture film. If the curb isn’t sloped correctly, water pools and the tempered edge chips and eventually shatters. We fix the curb before the glass fails.
- Jam-packed sliding panels in Mission Street apartments. The tight rows of 1960s-70s apartment buildings along Mission Street often have decades of neglected gaskets and trim. Mr-Glass sliding panels jam on weathered top tracks and weep paths clog, hiding water damage behind the frame. We replace tracks, gaskets, and panels as a system.
- Edge-chip failures in older tract homes. Thinner 6mm Mr-Glass mirror and panel stock in Daly City’s 1940s-1960s tract homes is more susceptible to edge chips when framing has tightened or warped around the original opening. We inspect the frame before recommending a like-for-like replacement.
Mr-Glass Service in Daly City: What Local Conditions Mean for Your Equipment
Daly City’s hillside lots sit on wind-blown sand and old fill. Ground behind and around garage cuts shifts after heavy winter rain, which means a Mr-Glass enclosure installed in a basement-level or cut-in bathroom has to be templated to a frame that will move. That’s not a condition we see on the solid-ground subdivisions east of the hills, unlike Mr-Glass repair in Visitacion Valley where terrain varies. On the steep dune-side streets in the Westlake hills and above Mission Street, contractors routinely find that the “solid” ground behind a retaining wall is loose sand that drains and shifts after a wet season. So we don’t template Mr-Glass to the nominal opening. We template to a shimmed, re-blocked wall assembly that can absorb a quarter-inch of movement without transferring stress to the glass edge. If we skip that step, the panel binds within two seasons and the edge chips or the hinges pull out of the jamb. That preparation is the single biggest difference between a Mr-Glass shower that lasts here and one that fails early. It’s also the thing that no generic glass page will tell you.
On a Westlake hillside home off one of those steep dune-side streets, we tore out a tired 1990s shower and installed a Mr-Glass frameless 3/8″ enclosure. Before any glass showed up, we shimmed and re-blocked the studs because the sand-backed wall had shifted after a wet winter. The owner got the fog-defying glass she wanted with a level, sealed curb that won’t trap water when Karl the Fog settles in for the season.
Mr-Glass Models & Products We Service in Daly City
We work across the full Mr-Glass product range: frameless tempered shower enclosures in 10mm and 3/8″ glass with pivot or sliding hardware, semi-frameless sliders, neo-angle shower enclosures, custom-cut mirrors and vanity glass, interior glass partitions, and glass railing systems.
Our parts approach is simple. We use genuine Mr-Glass OEM hardware and seals where they’re still available. Where they aren’t, we source high-quality equivalent glazing stock and fittings that match thickness, temper, and hinge geometry. For Daly City turnaround, we keep common seal profiles, hinge sets, and sweep gaskets on hand so brackets and handles don’t bottleneck the job. If the frame is solid and only a hinge or seal failed, we repair. If the panel edge is compromised or the wall behind it is moving, we say so plainly and quote the replacement.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Daly City
Pricing for Mr-Glass installation in Daly City depends on panel size, hardware finish, and how much wall preparation the job requires. Here’s what we typically see:
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure / Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Our free estimate covers the glass, hardware, seals, any shimming or re-blocking the wall needs, and the final sealed installation. No change orders for wall prep discovered mid-job. Call (833) 400-1314 and we’ll come out, measure, and give you a written line-item quote.
Serving Daly City, CA — Our Local Coverage Area
We’re based in the Daly City area and know this community well, including nearby Colma Mr-Glass service areas. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Daly City
Yes, but only if the wall is prepped correctly before templating. We shim and re-block studs on sand-backed walls, then template the Mr-Glass panel to the stabilized frame rather than the nominal opening. Call (833) 400-1314 for a free inspection and quote.
Mostly yes. Daly City’s marine layer keeps seals damp, which is why calcium spotting and black mold creep appear within a couple of seasons. But a permanent fix requires more than cleaning; we replace the failed seals and slope the curb so water drains instead of pooling. Call (833) 400-1314 and we’ll assess what’s feeding the mold.
Yes. We handle tub-to-shower conversions across Daly City, and we check the framing, plumbing, and curb slope before ordering Mr-Glass panels, since the original galvanized plumbing and shifting walls can affect how the glass sits. Estimates are free – call (833) 400-1314.
For most direct shower enclosure replacements, no. But if the job changes the shower footprint, moves plumbing, or involves structural work on a load-bearing wall, Daly City’s building department will likely want a permit. We pull permits when they’re required and handle the inspections. Call (833) 400-1314 to confirm what your project needs.
Custom tempered Mr-Glass panels typically take two to four weeks from template to installation, depending on the glass thickness and hardware finish. Stock hardware and seal profiles we keep on hand speed up the turnaround. For a current lead time and exact quote, call (833) 400-1314.
Service Areas Near Daly City
We also serve homeowners across the South Bay and Peninsula, including Mr-Glass service in Mission District and Mr-Glass service in Noe Valley. For full coverage details across the region, see our Daly City service area page. If you’re in Gilroy, San Martin, Aromas, Morgan Hill, or San Juan Bautista, we cover those neighborhoods too.
Book Your Mr-Glass Service in Daly City Today
Fog, sand, and moving walls. That’s the reality of Mr-Glass work in Daly City, and we’ve seen enough of it to know exactly what to check before we cut glass. We also handle Mr-Glass in Brisbane and surrounding communities. Call (833) 400-1314 to schedule your free estimate. Noel Carvalho and the Silver Line team will measure, quote, and tell you straight what your project needs.
Written by Noel Carvalho, Owner & General Contractor at Silver Line Contractors, serving Daly City and the wider South Bay. Good construction doesn’t need a sales pitch – the work explains itself.