Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Brisbane, CA | Silver Line Contractors
Mr-Glass shower enclosures and glass panels in Brisbane are a job we know well, because this town’s hillside homes and fog-belt moisture create very specific failure points. We’re Silver Line Contractors, an independent General Contractor in Brisbane led by Noel Carvalho, and we repair, re-glaze, and install these systems across the 94005. If your Mr-Glass door is pulling loose, fogging, or leaking at the curb, call (833) 400-1314 for a free estimate.
We service all Mr-Glass shower and glass work in Brisbane, from Mr-Glass sales & service to full enclosures on the Crocker slopes. We are not manufacturer-authorized or affiliated with Mr-Glass, and that’s deliberate. We work for you. When a hinge block has failed or a threshold is pitched wrong, we tell you the honest fix, not the factory line.
Why Brisbane Residents Choose Us for Mr-Glass Service
Most Brisbane homes sit on steep grades, and the older ones were built before frameless glass doors were common. That means the wall behind the tile usually was never blocked for heavy pivot hardware. We know exactly what that looks like when we open one up. We have been inside enough of these bathrooms to predict the problem before we remove a single tile.
Noel Carvalho spent years working every phase of residential construction across Santa Clara County before starting Silver Line Contractors, so when a Mr-Glass door fails, our team understands whether the issue is the glass, the hardware, the framing behind the wall, or the drainage beneath the curb. Good construction doesn’t need a sales pitch – the work explains itself. On a Crocker-facing hillside home above the Bayshore, we opened a bathroom to retrofit a Mr-Glass frameless enclosure and found the door hinge pulling out because the original wall had no blocking. We added proper stud-and-blocking, re-set the OEM pivots, and re-glazed the panels with correctly sloped curbs so water finally ran to the drain instead of into the wall. That is the fix the old install never had.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Brisbane
- Pivot and hinge screws pulling out of the wall. On Brisbane’s older hillside homes, the framing behind the shower tile is often thin or was never blocked for the weight of a hinged Mr-Glass door. We open the wall, install proper blocking, and re-set the hardware so it holds.
- Foggy, etched, or spotted glass. North-facing slopes in Brisbane sit in fog and constant moisture, and shower panels never fully dry. Hard water spotting turns to permanent etching. We re-glaze panels when the damage is light, and replace glass when pitting has gone too deep.
- Sliding-door rollers and tracks corroding. Wind-driven rain pushes moisture into deck-adjacent bathrooms on the hillside, and cheap rollers seize up. We swap in corrosion-rated rollers and seals that hold up in marine air.
- Water weeping under the curb. A flat or reversed-slope threshold lets water sit and migrate under the Mr-Glass curb, and mold establishes behind the enclosure. Brisbane’s persistent moisture makes this worse than in drier parts of the Peninsula. We re-pitch the curb and re-seal the threshold properly.
- Frameless panels that flex after seismic movement. Brisbane sits near the San Andreas and Serra fault traces. Older Mr-Glass installations with floating panels can shift after a quake or even a heavy truck on the hill. We re-square the framing and re-plumb the glass so the door hangs true again.
Mr-Glass Service in Brisbane: What Local Conditions Mean for Your Equipment
Brisbane’s planning department reviews nearly every project for slope stability and bayfront proximity in a way neighboring cities don’t. Even a bathroom glass-and-shower project that opens a wall can get pulled into grading and drainage scrutiny tied to the hillside above the Bayshore. Before we template any Mr-Glass glass on these permits-driven remodels, we confirm what the city will actually require. That is not a step a generic shower installer takes.
On the hillside streets above the 101, several homes are dealing with downslope creep and old unpermitted retaining walls behind the house, and we also handle Mr-Glass repair in San Bruno. When a retaining wall bows during a heavy winter storm, the bathroom above it often shifts, and a Mr-Glass enclosure is one of the first things to show it, whether through hinge pull-out, a door that no longer closes square, or a curb that starts seeping. We see this pattern often enough that our first question on a Brisbane repair is never about the glass. It is about the ground under the house.
Mr-Glass Models & Products We Service in Brisbane
We work on Mr-Glass frameless hinged shower door enclosures, semi-frameless sliding shower doors, Neo-Round and Neo-Angle corner shower enclosures, and custom-cut mirror and glass panel systems. For hardware, we use Mr-Glass-compatible OEM or equivalent-grade hinges, pivots, rollers, and seals rated for continual moisture exposure. We keep the common wear parts on hand for fast Brisbane turnaround.
We re-glaze rather than replace a whole enclosure when the frame and glass dimensions are still sound. But when pitting, delamination, or repeated hardware failure shows the original framing or glass is past its service life, we will say so plainly. Replacement is sometimes the honest call. We never force a factory replacement when a re-glaze will hold.
We also handle the broader bathroom scope around the glass: Brisbane service area includes walk-in shower installation, tub-to-shower conversions, and full shower remodeling. One contractor, one contract, from the curb to the tile to the glass.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Brisbane
Here is what Mr-Glass-related shower work typically runs in Brisbane. These are the ranges we work within, calibrated for this market.
| Service | Price Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
What drives the final number is the condition of the wall behind the glass, whether the curb needs re-pitching, and whether the city requires geotech or drainage review before we reopen a closed wall. A free estimate includes measuring, a written line-item quote, and a plain answer on whether we repair or replace. Call (833) 400-1314 for an exact number on your Mr-Glass enclosure in Brisbane.
Serving Brisbane, CA — Our Local Coverage Area
We’re based in the Brisbane area and know this community well, and we also provide Mr-Glass service in South San Francisco. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Brisbane
Mold behind the enclosure is usually water weeping under a flat or reversed-slope curb, aggravated by Brisbane’s marine climate keeping exterior walls damp. We fix it by re-pitching the curb, re-sealing the threshold, and addressing the drainage before re-glazing the panels. Tearing out the whole shower is rarely necessary. Call (833) 400-1314 and we will tell you what yours actually needs.
No. Silver Line Contractors is an independent contractor serving Brisbane. We are not manufacturer-authorized or affiliated with Mr-Glass. That means when we recommend a repair or a replacement, the recommendation is for you, not for a factory warranty quota.
Most hinge, roller, and seal repairs finish same day once parts are on the truck, and we keep common Mr-Glass-compatible hardware stocked for quick turnaround in the 94005 and for Mr-Glass in Daly City. Re-glazing jobs generally run one to two days, depending on how many panels need new glass and whether the framing behind the wall needs blocking.
We service Mr-Glass frameless hinged shower doors, semi-frameless sliding enclosures, Neo-Round and Neo-Angle corner units, and custom-cut glass panel systems. If it says Mr-Glass and it is in a Brisbane home, we can likely repair or re-glaze it.
Most repairs run from roughly $3,000 to $8,500 when hardware, re-glazing, or curb re-pitching is involved, and a full walk-in shower installation or tub-to-shower conversion spans $3,500 to $12,000. The specific number depends on what is behind the tile and whether the city requires slope or drainage review. Call (833) 400-1314 for a free, written quote.
Service Areas Near Brisbane
Our Mr-Glass crews serve Brisbane and the surrounding hillside communities. We also provide Mr-Glass service in Pacifica and Mr-Glass service in Visitacion Valley. For glass work anywhere on the Peninsula or in the South Bay, call (833) 400-1314.
Book Your Mr-Glass Service in Brisbane Today
If your Mr-Glass door is pulling loose, fogging over, or letting water under the curb in a Brisbane hillside home, call (833) 400-1314. We will measure, price it plainly, and tell you whether it is a repair or a replacement. Estimates are free.
Written by Noel Carvalho, Owner & General Contractor at Silver Line Contractors, serving Brisbane and the broader Peninsula.