Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Boulder Creek, CA | Silver Line Contractors
We provide independent Unilock paver and wall installation, repair, and rebuild service across Boulder Creek, CA. We’ve laid Unilock Brussels Block, Beacon Hill, Richcliff, and Pisa2 systems on steep redwood-shaded lots throughout 95006 for years. The one thing that makes Unilock work here different is the canyon itself: narrow access off Bear Creek Road and Highway 236, near-constant shade, heavy winter rain, and subgrades that fight you. Call (833) 400-1314 for a free estimate.
Why Boulder Creek Residents Choose Us for Unilock Service
Noel Carvalho, our owner, grew up watching his father patch and improve the family home near Christmas Hill Park in Gilroy. He didn’t learn construction in a classroom; he learned it when work either held or it didn’t. That early lesson shaped how we approach every Unilock job in Boulder Creek and nearby communities like Unilock repair in Brookdale. We know this product line, the base prep it demands, and the specific ways it fails in a wet canyon with constant redwood shade. We are not authorized, sponsored, or endorsed by Unilock. We’re an independent installer who handles their systems and manages warranty paperwork on the homeowner’s behalf when a material defect surfaces. That independence means we give you honest answers about what will actually hold up in Boulder Creek. If a base is failing, we’ll tell you. Good construction doesn’t need a sales pitch, the work explains itself.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Boulder Creek
- Efflorescence and salt bloom on Brussels Block and Beacon Hill pavers. Boulder Creek’s wet winters and deep redwood shade keep paver surfaces damp for months. Water wicks through the concrete, carrying minerals to the surface, and the result is that chalky white film. We treat the cause, not just the symptom, and adjust joint sand to reduce water retention.
- Base failure and settling on sloped driveways and patio pads. Many Boulder Creek homes sit on pier-and-post foundations with seasonal drainage channels running through the lot. If the original paver subgrade wasn’t excavated deep enough, the base shifts and the surface sags. We re-excavate, re-compact, and re-lay with proper drainage.
- Edge spalling and joint sand washout at driveway lips. Driveways fed by Bear Creek Road and Highway 236 channel runoff across the surface during heavy storms. The water shears across the pavers, scouring out polymeric sand and chipping exposed edges. We rebuild with Unilock edge restraints and re-sand for a lasting seal.
- Pisa2 and Tribeca retaining wall bulging or face damage. Hillside lots in Boulder Creek often have walls added after the original grading. Without proper geogrid and drainage stone, a wall built too vertically will bulge or crack. We rebuild the wall section with the right reinforcement for the slope.
- Shallow-base driveway failures on sloped, shaded lots. We’ve pulled apart driveways where the original installer laid the base only a few inches deep and hoped for the best. Boulder Creek’s rain and runoff expose that shortcut within two seasons. A proper rebuild starts at the subgrade.
Unilock Service in Boulder Creek: What Local Conditions Mean for Your Equipment
Every paver driveway and patio delivery in Boulder Creek has to clear the narrow, winding grade on Bear Creek Road and Highway 236. A full pallet truck that can’t turn around or make the climb can shut a job down for half a day, so we stage material and size loads around the canyon access before we lay a single Unilock paver. That’s not a detail a general paver crew from over the hill thinks about until the truck is stuck. We plan for it. On a sloped, redwood-shaded lot off Bear Creek Road, we rebuilt a failing Unilock Brussels Block driveway where the original base had been laid too shallow and washout was scouring the joint sand every winter — similar challenges to what we see with Felton Unilock service calls. We stripped the pavers, re-excavated and re-compacted the subgrade with fresh drainage, re-laid the Brussels Block with new edge restraints and polymeric sand, and staged the pallets in small loads because the delivery truck couldn’t turn around on the narrow grade. That’s what Unilock work in Boulder Creek actually looks like.
Unilock Models & Products We Service in Boulder Creek
We install and repair the full Unilock residential lineup. Brussels Block, their tumbled concrete paver, is the most common surface we see on Boulder Creek driveways and patios. Beacon Hill Flagstone gives you that irregular flagstone texture with interlocking strength. For driveways and aprons, we use Bristol Valley or Richcliff. For retaining and seat walls, Pisa2 and Tribeca are the systems we prefer. We use Unilock’s own matching components, their edge restraints, cap units, and polymeric joint sand, because mixing generic sand and restraints is where most paver driveways and walls fail in a wet climate. On a solid base we repair and re-sand rather than tear out. When the subgrade is the problem, we’re honest that a full rebuild is the only lasting fix. For a deeper look at our Unilock capability, see our Unilock sales & service page.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Boulder Creek
Here’s what Unilock paver and driveway work costs in Boulder Creek.
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Sealing | $250 – $700 |
What drives the cost here is access. A full pallet truck makes one run on flat ground, but in Boulder Creek we’re often staging smaller loads because of the turning radius on Bear Creek Road. That adds labor. Steep slopes add base depth and drainage work. If your existing subgrade is viable, we repair and re-sand instead of tearing out, which keeps the bill down. A free estimate from us includes a site inspection and a written line-item quote. Call (833) 400-1314 to schedule yours.
Serving Boulder Creek, CA — Our Local Coverage Area
We’re based in the Boulder Creek area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Boulder Creek
Yes, but only with a properly excavated and compacted base, the right drainage, and Unilock’s edge restraints. Steep grades put shearing force on the surface every time it rains, and a shallow base will fail. For grades over about 8 percent, we add geogrid and deeper base stone. Call (833) 400-1314 for an evaluation of your specific driveway.
That white powder is efflorescence, and in Boulder Creek it’s driven by near-constant redwood shade and wet winters that keep pavers damp for weeks. When moisture moves through the concrete, it carries minerals to the surface. Joint sand loss usually means water is shearing across the surface, which points to a drainage issue, not bad sand — a common pattern in areas like Unilock service in Lompico as well. We fix both with proper joint sand and surface slope correction.
We stage it. We coordinate with the supplier to send smaller loads on smaller trucks or trailers that can actually make the turn onto your road. Sometimes that means three trips instead of one, and we schedule labor around that so nobody stands around waiting. We plan truck access before we lay a single paver. Call (833) 400-1314 and we’ll work out the delivery plan for your lot.
If it’s built correctly, yes. The problem in Boulder Creek is that many hillside walls were added after the original lot grading, without proper geogrid reinforcement or drainage stone behind the wall. A Pisa2 or Tribeca wall built too vertically and backfilled with native soil will bulge within a few winters. We rebuild with the right reinforced structure, drainage, and cap units. An exact quote is free, call (833) 400-1314.
Usually yes for retaining walls over 4 feet, and sometimes for patio or driveway work if it changes grading or drainage. Boulder Creek is unincorporated, so you’re dealing with Santa Cruz County building requirements rather than a city department. We pull the permits and schedule the inspections as part of the job. Call (833) 400-1314 and we’ll confirm what your project needs.
Service Areas Near Boulder Creek
We serve Boulder Creek and the surrounding Santa Cruz Mountains communities, along with the South Bay and South County areas. That includes Gilroy, San Martin, Aromas, Morgan Hill, Interlaken, and San Juan Bautista. For Unilock work specifically, see Unilock service in Santa Clara and Unilock service in Bonny Doon. We cover the full Boulder Creek service area and all of 95006.
Book Your Unilock Service in Boulder Creek Today
If your Unilock driveway is settling, your patio is losing joint sand, or you’re planning new paver work, call (833) 400-1314 today. We’ll walk the site, give you a straight answer, and provide a free line-item estimate. We’re one contractor for every phase, from base prep to final polymeric sand.
Written by Noel Carvalho, Owner & General Contractor at Silver Line Contractors, serving Boulder Creek and the Santa Cruz Mountains.