Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Belvedere, CA | Silver Line Contractors
We provide independent CGI cabinet and countertop installation, refacing, and repair across Belvedere’s steep hillside and lagoon-front homes. We’re not affiliated with CGI; we’re our General Contractor in Belvedere who works with their RTA and frameless lines because the all-plywood boxes hold up in coastal air when detailed correctly. The thing that separates CGI work in Belvedere from anywhere else is access: nearly every install here is a rebuild inside an existing footprint on a slope, with a winding road between the truck and the front door. Call (833) 400-1314 for a free estimate on CGI kitchen remodels, countertop replacements, and full-scope renovations across 94920.
Why Belvedere Residents Choose Us for CGI Service
Our crew has spent years installing and correcting CGI cabinet and countertop lines in Marin’s tight, salt-exposed hillside homes. We know how these products actually behave in Belvedere’s climate, not how they look in a showroom. Noel Carvalho, our owner and general contractor, grew up watching his father patch and improve a family home in Gilroy, then studied construction technology at Gavilan College before working every phase of our Home Remodeling in Belvedere and residential builds across Santa Clara County. That background is why we treat a CGI cabinet run as a structural job, not a box-setting exercise. Good construction doesn’t need a sales pitch; the work explains itself.
We’re CGI sales & service contractors in the practical sense: we spec, stage, install, and repair their products. We are not authorized, sponsored, or backed by CGI. We earn repeat work by making their cabinets and tops fit real, difficult houses, the kind Belvedere has in abundance.
Styles & brands we work with
Common CGI Construction Problems We Solve in Belvedere
- Salt-air corrosion on hinges, slides, and fasteners. Homes near the Belvedere Lagoon or on west-facing hillsides above Richardson Bay get years of marine moisture settling into kitchen hardware. Cheap hinges and drawer slides on CGI boxes installed near windows fail fast. We swap in corrosion-rated hardware and tell you which walls need it.
- Racked frameless boxes from out-of-plumb walls and uneven floors. Hillside homes stacked up Belvedere Island shift over decades. A frameless CGI cabinet box set against a wall that’s an inch out of plumb will rack, and doors stop closing square. We shim and scribe every run before it’s fastened.
- Swelling toe kicks and back panels on lagoon-flats homes. Older homes on the Belvedere Lagoon flats carry decades of winter damp. A slow under-sink leak or poor cabinet ventilation causes CGI toe kicks and back panels to delaminate. We find the moisture source before replacing anything.
- Quartz seams and sink cutouts cracking after the first big storm. CGI quartz tops set over walls that move when winter rain saturates hillside soil can crack at seams and cutouts. We level and reinforce the cabinet run before templating so the slab isn’t fighting the house.
- Cabinet doors out of square after a full kitchen gut. This one’s common on any Belvedere remodel: demolition exposes framing that shifted years ago. If you don’t correct for that before setting CGI boxes, you’ll chase door alignment forever. We correct it once, during rough-in.
CGI Service in Belvedere: What Local Conditions Mean for Your Equipment
Belvedere was incorporated in 1896, and its housing stock reflects that: early-1900s shingle-style and Mediterranean homes on the lagoon flats, mid-century view homes stacked up the island’s hillsides. There is essentially no vacant land, and the waterfront flats housing is older and protected. What this means for a CGI kitchen install is that it’s almost always a rebuild inside an existing footprint on a steep lot. Cabinet boxes, countertop slabs, and appliances have to be measured, staged, and hauled in through tight, winding island roads before anyone swings a hammer. On a steep Belvedere Island lot off the roads above the lagoon, our crew tore out a water-swollen 1990s kitchen and set new CGI frameless cabinet runs that we shimmed and scribed to walls a full inch out of plumb, then templated CGI quartz tops only after the boxes were dead level. Salt-air corrosion had eaten the old hinges, so we spec’d corrosion-rated hardware and hauled every box and slab up by hand because no truck could stage at the door. The result was a square, tight kitchen that survived its first wet winter without a single door rubbing or seam cracking. That’s the Belvedere difference: the install is as much about the road and the slope as it is about the product.
CGI Models & Products We Service in Belvedere
We work with the CGI lines that actually fit Belvedere’s housing stock, including options from CGI service in Tiburon. That includes CGI Ready-to-Assemble all-plywood kitchen cabinets, which we assemble and fasten in place; CGI Euro-style frameless cabinet boxes, which suit the clean lines a lot of Belvedere remodels favor; CGI quartz and granite countertop slabs, which we template only after the bases are level; and CGI vanity and bath cabinet lines for bathrooms being rebuilt alongside the kitchen. We use CGI’s own boxes and fronts where the product line calls for them, but we swap in quality aftermarket hinges, slides, and corrosion-rated hardware that hold up better in salt air. We’ll also tell you honestly when a CGI cabinet run is worth refacing versus a full replacement, because the answer changes depending on which side of the lagoon you live on.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Belvedere
Pricing for CGI work in Belvedere depends on access, scope, and how much correction the existing structure needs. A kitchen that needs boxes hauled up a hillside by hand costs more than one with a garage-level entry. Here’s what CGI-related work typically runs in this market:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Backsplash Installation | $800 – $2,500 |
A free estimate includes a walkthrough of access, a check of wall and floor condition, and a line-item quote so you know what you’re paying for before work starts. Call (833) 400-1314 to schedule one.
Serving Belvedere, CA — Our Local Coverage Area
We’re based in the Belvedere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Belvedere
No. We’re an independent general contractor that installs and repairs CGI products. We’ve done the work long enough to know how their lines behave in Belvedere’s salt air and hillside homes, and we spec parts and hardware accordingly. If a warranty claim on a CGI product ever comes up, we’ll help you navigate it, but we never pretend to be the manufacturer.
Both, depending on what the job calls for. We use CGI’s own boxes, fronts, and panels where the product line requires them. But for hinges, drawer slides, and fasteners, we often spec aftermarket corrosion-rated hardware from CGI repair in Chinatown, because the salt air off Richardson Bay and the Belvedere Lagoon eats standard hardware faster than manufacturers expect. We’ll show you the difference in person.
Most full CGI kitchen remodels in Belvedere run three to six weeks, not counting design review. Access is the variable: hillside lots with no truck staging add haul-in time for every box and slab. We’ll give you a schedule after the first walkthrough.
Yes. Belvedere’s design review process applies to most exterior-visible changes and some interior scope. We prepare submittal drawings, coordinate with the appropriate review body, and handle revisions. Since most Belvedere remodels are rebuilds inside existing footprints on protected or view-sensitive lots, we make sure the drawings match what the reviewer will actually see. Call (833) 400-1314 for a free estimate and we’ll tell you what your project triggers.
Full kitchen remodels with CGI cabinets typically run $14,000 to $45,000 in this market, while countertop installation alone runs $2,000 to $6,500. Hillside access and wall correction can push a job toward the upper end. Call (833) 400-1314 for an exact quote; estimates are free.
Service Areas Near Belvedere
We serve Belvedere and surrounding Marin County communities. Belvedere service area covers the island and lagoon flats. We also run CGI service in Sausalito and CGI service in Marin City, and we work into Tiburon and Mill Valley for full remodels and countertop replacements.
Book Your CGI Service in Belvedere Today
If you’re planning a CGI cabinet install, countertop replacement, or full kitchen rebuild in Belvedere, call (833) 400-1314. We’ll walk your lot, check your walls, and give you a written quote. Free estimates, no obligation.
Written by Noel Carvalho, Owner at Silver Line Contractors, serving Belvedere and Marin County.