Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Redwood Shores, CA | Silver Line Contractors
We install and repair Unilock paver systems across Redwood Shores, and the work here is different from anywhere else on the peninsula because every lot sits on engineered fill over former tidal marsh. That changes how a Unilock paver field needs to be built, and it’s the main reason patios and driveways fail early in this community. If you’re planning Unilock work in Redwood Shores, call (833) 400-1314 and we’ll assess your base and drainage before touching a single paver.
Silver Line Contractors is an independent Unilock service provider, not a manufacturer-authorized dealer, which means our recommendations come from what holds up on Bay-adjacent fill, not from a sales quota. We work with genuine Unilock units and honest engineering judgement. For Unilock sales & service throughout the 94065 ZIP, we’re the crew that handles the base build-up as seriously as the surface.
Why Redwood Shores Residents Choose Us for Unilock Service
Noel Carvalho founded Silver Line Contractors after years of working every phase of residential construction across Santa Clara County, and he brings a blunt, field-level read to hardscape work that most paver installers never develop. He studied construction technology at Gavilan College, then spent decades learning what holds and what fails under Bay Area conditions. That background matters in Redwood Shores because a Unilock patio here is not the same job as one in Belmont or Unilock in San Carlos. The fill soils and perched groundwater change the math.
We know Unilock’s model lines well: Brussels Block, Cambridge Cobble, Beacon Hill Flagstone, and Umbriano. We stock genuine Unilock units and Unilock-spec edge restraints locally, so turnaround on repairs in Redwood Shores stays tight. And because we’re independent, we’ll tell you plainly when a different base specification makes more sense than the default. Good construction doesn’t need a sales pitch – the work explains itself.
Styles & brands we work with
Common Unilock Construction Problems We Solve in Redwood Shores
- Settling and heaved pavers on engineered fill. Redwood Shores lots look flat, but bay mud and perched groundwater sit just a few feet down. Unilock Brussels Block and Cambridge Cobble fields built without a properly compacted, geotextile-separated base will heave within a few seasons.
- Joint sand washout after Bay-driven rain. Winter storms off the Bay push wind-driven rain across paver fields, scouring polymeric jointing that was specified for drier inland conditions. Brussels Block and Cambridge Cobble show this failure most often in Redwood Shores.
- Efflorescence and salt staining on Umbriano and Beacon Hill. Persistent onshore fog and salt air keep paver surfaces damp longer here than in Foster City. Umbriano and Beacon Hill Flagstone slabs develop white mineral bloom and surface staining that looks like material failure but is usually a moisture management problem.
- Edge restraint and joint failure along driveways. Fill soils settle unevenly, pulling paver fields away from edge restraints and opening joints to moisture. Driveway aprons in Redwood Shores see this constantly, especially where drainage ties into shared storm systems.
- Wavy paver surfaces that signal base failure, not paver failure. On a Marine Parkway-area patio, we pulled up a Unilock Brussels Block field that had gone wavy within a few seasons. The units were fine. The base was not. We’ll often reset the same Unilock units over a rebuilt base rather than sell a full replacement.
Unilock Service in Redwood Shores: What Local Conditions Mean for Your Equipment
Redwood Shores is a master-planned, fill-and-berm community built almost entirely on former tidal marshland from the 1980s onward. Every lot here sits on engineered fill over bay mud, with high groundwater and shared private storm infrastructure layered beneath standardized lot grades. That means a Unilock paver field in Redwood Shores lives or dies on the base build-up and drainage tie-in, not the paver color. A crew sizing a patio by eye the way they would on a Unilock in San Mateo hillside lot will get this wrong. The fill compacts unevenly. The groundwater saturates the subgrade. And the shared storm system means a drainage mistake on one lot can push water onto a neighbor’s paver field or against a shared wall. When we build Unilock driveways and patios near Marine Parkway and Redwood Shores Parkway, we excavate to stable material, install compacted aggregate with separation fabric, and gate drainage to daylight rather than let it pond against the house.
Unilock Models & Products We Service in Redwood Shores
We install, repair, and reset the full Unilock line: Brussels Block, Cambridge Cobble, Beacon Hill Flagstone, and Umbriano. For parts, we use genuine Unilock units and Unilock-spec edge restraints to keep the interlock and color match honest. On polymeric jointing sand and geotextile, we use quality aftermarket products where they outperform the default for Redwood Shores’ fog and salt exposure. On a 1980s to 2000s paver field, the honest call is usually rebuild the base and reset the same Unilock units rather than replace the surface. But if the base was never adequate for fill soils, patch repair just moves the failure.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Redwood Shores
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Cost depends on base depth, drainage scope, and how much existing fill material we need to excavate to reach stable ground. A free estimate covers the site walk, base spec, and a written line-item quote so you know what you’re paying for before any work starts. Call (833) 400-1314 to schedule yours.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re a Redwood Shores General Contractor based in the area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Redwood Shores
Because the entire community is built on fill over former tidal marsh, and the base under a paver field is what carries the load, not the pavers. If the base wasn’t compacted over separation fabric and tied into drainage, the fill settles unevenly and the pavers heave. We excavate to stable material and rebuild the base properly. Call (833) 400-1314 and we’ll tell you what’s under your pavers before you spend more on the surface.
The salt and fog mostly accelerate surface staining and efflorescence on Umbriano and Beacon Hill slab lines, not structural failure. But the moisture they deliver into the base and joints is what drives real damage, especially when combined with fill settlement. We specify jointing and drainage that handles the damp, salt-driven conditions of Redwood Shores.
Yes, and in most Redwood Shores failures, the Unilock units are fine and the base is the problem. We pull up the field, rebuild the base with proper compaction and geotextile, reset the same units, and restore the edge restraint. If the base was never adequate, resetting without fixing the base just moves the failure.
Almost always yes. Redwood Shores has layered HOA and architectural review on top of City of Redwood City permitting, because the whole community was built as one developer’s master plan. We help you assemble the submittal package and pull the permits so the work passes inspection the first time.
In Belmont or San Carlos, you’re usually building on native hillside soils. In Redwood Shores, you’re building on fill over bay mud with groundwater a few feet down, and drainage ties into shared storm systems. That means deeper excavation, separation fabric, more base aggregate, and a drainage plan that gets water off the paver field and away from the house. Call (833) 400-1314 for an exact scope and quote – estimates are free.
Service Areas Near Redwood Shores
We serve Redwood Shores and the surrounding peninsula communities, including Redwood Shores service area, plus Unilock service in Belmont and Unilock service in Foster City. Our crews know the soil and drainage differences between these cities and spec the base accordingly.
Book Your Unilock Service in Redwood Shores Today
If your Unilock pavers are heaving, washing out, or showing salt bloom, call (833) 400-1314 for a free estimate. We’ll inspect the base, check the drainage tie-in, and give you a written quote before any work begins. Serving Redwood Shores, CA 94065.
Written by Noel Carvalho, Owner at Silver Line Contractors, serving Redwood Shores since the company’s founding.