Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Construction in Gilroy, CA | Silver Line Contractors
We’re an independent contractor installing and repairing Belgard paver driveways, patios, and retaining walls throughout Gilroy, CA. What sets our Belgard work apart here is that we build for this valley’s specific conditions: hot summer afternoons that stress joint sand, fault-zone ground movement, and Gilroy’s own city permitting process. Noel Carvalho, our owner and GC, grew up on Gilroy’s south end and knows the difference between a paver job that looks good in May and one that still holds in October. Call (833) 400-1314 for a free estimate on any Belgard sales & service project, from a new driveway to a failing retaining wall.
Why Gilroy Residents Choose Us for Belgard Service
We’ve built enough Belgard work across Gilroy service area lots to know the brand’s real tolerances here, not just what a catalog prints. Belgard Catalina Grana pavers, Dimensions Series 16 and 12, Anchor Highland Stone wall block, Mega-Lafitt and Mini-Lafitt systems: we know how each behaves under a hundred-degree July afternoon and a damp January morning. Noel Carvalho studied construction technology at Gavilan College in Gilroy, then spent decades running every phase of residential builds across Santa Clara County before starting Silver Line Contractors. That means when we set pavers in Gilroy, we’re thinking about the same shrink-swell soil and seismic detailing he learned on local job sites. Good construction doesn’t need a sales pitch – the work explains itself. We source genuine Belgard units for color and dimensional match, but we’ll use better aftermarket polymeric sand, edge restraint, or geogrid where the spec calls for it. One contractor, every phase: we handle the Belgard work, the drainage behind it, and the grading under it without handing you off to a landscape subcontractor.
Styles & brands we work with







Common Belgard Construction Problems We Solve in Gilroy
- Efflorescence bloom on Catalina Grana and Dimensions pavers. Gilroy’s dry-season swing from hot afternoons to cool, damp nights pulls calcium salts to the paver surface, leaving a chalky white haze that reads like the pavers failed. It hasn’t failed – it’s a mineral wick. We clean, re-seal, and re-sand so the color comes back.
- Edge raveling and joint-sand loss on driveway aprons. Full-sun Gilroy driveway approaches stress polymeric sand faster than anywhere else in south Santa Clara County. The sand breaks down, pavers start walking, and edges crumble. We re-compact, re-sand with a blend that handles the heat, and re-set the edge restraint properly.
- Wall block settlement on Anchor Highland Stone. Growth-edge Gilroy properties often sit on lots where grade changes within a single yard. When a Belgard wall goes in without adequate geogrid and compacted base, the block begins to lean after the first summer. We re-cut footing and rebuild in lifts, not by stacking more block on a failed base.
- Color fade and surface scuffing on under-compacted bases. Newer infill lots across east and south Gilroy often have native soil that was never prepped before Belgard pavers were placed. Vehicle turning creates slow surface wear that looks like a product defect. It’s a base problem, and we fix the base.
- Drainage failures behind retaining walls. Gilroy’s seasonal rain arrives fast and exits through layers of clay-heavy soil. When a wall’s weep points are missing or undersized, hydrostatic pressure builds and pushes the block face. We add proper drainage behind the wall before resetting the Belgard units.
Belgard Service in Gilroy: What Local Conditions Mean for Your Equipment
The San Andreas and nearby faults run right through this corridor of south Santa Clara County, and Gilroy’s own city permitting governs nearly all of the developed footprint. That combination means a Belgard retaining wall here is not a landscape-grade stack of block. Any wall over a few feet tall needs an engineered footing, proper geogrid placement, and drainage details that survive both seismic movement and the hot dry-season shrink-swell cycle our native soils go through every year. On a slope lot off the south growth edge of Gilroy, we tore out a failing Anchor Highland Stone wall where the original base had been placed without geogrid and had begun to lean after a summer of shrink-swell. If you need Morgan Hill Belgard service, we cover that area as well. Our crew re-cut the footing, rebuilt the base in lifts with compacted aggregate and geogrid, and re-set the Belgard units with proper drainage weep points. The wall has held through two wet seasons, and the homeowner kept her original block color instead of paying for full replacement. That’s the difference Gilroy’s ground makes. A generic paver contractor from over the hill might not account for it. We build for it every day.
Belgard Models & Products We Service in Gilroy
We handle the full range of Belgard hardscape product families in residential Gilroy service. That includes Catalina Grana pavers, the Dimensions Series 16 and 12 lines, Anchor Highland Stone retaining wall block, and the Mega-Lafitt and Mini-Lafitt wall systems. When a repair calls for new units, we source genuine Belgard pavers and matching wall blocks so color and dimensional continuity hold across the repair. For the stuff that actually fails – polymeric joint sand, edge restraint, geogrid – we use quality aftermarket materials where they beat the OEM accessory. We keep common repair materials staged locally so a Gilroy Home Remodeling project or driveway repair doesn’t wait on a slow manufacturer shipment.
See the difference
Before
After
Before
After
Before
AfterBelgard Service Pricing in Gilroy
Belgard paver work in Gilroy falls into clear ranges depending on scope: a new driveway runs more than a patio, and a wall rebuild lands higher than a simple re-sand. The table below shows what we’re seeing across Gilroy in 2026. What drives cost is mainly base prep – if the native soil needs full excavation and re-compaction, that’s more labor than the pavers themselves. A free estimate from us includes an on-site look at your existing base or a discussion of the grade before we quote. No vague numbers, no change orders after we start.
| Service | Typical Price Range (Gilroy) |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Sealing | $250 – $700 |
If your Belgard driveway is losing joint sand or your wall is leaning, call (833) 400-1314 and we’ll walk the site with you. Estimates are free and we’ll tell you honestly whether a repair makes sense or a rebuild is the smarter spend.
Serving Gilroy, CA — Our Local Coverage Area
We’re based in the Gilroy area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Belgard Construction in Gilroy
Do you install Belgard products under the Belgard warranty?
No. Silver Line Contractors is an independent contractor, not a Belgard-authorized dealer or manufacturer affiliate. We install Belgard products because we trust how they perform in Gilroy’s specific conditions, but any warranty claim runs directly through Belgard and your purchase documentation. We’ll help you with the paperwork if that ever comes up, and we warranty our own labor and base work regardless. Call (833) 400-1314 to ask us about a specific project.
Which Belgard paver and wall models do you service?
We work with Catalina Grana, Dimensions Series 16 and 12, Anchor Highland Stone, and the Mega-Lafitt and Mini-Lafitt wall systems. If you have a different Belgard product in place, call us anyway – we’re familiar with the full residential line and can assess it on-site.
Do you use genuine Belgard replacement units or aftermarket copies?
For pavers and wall block we source genuine Belgard so color and dimensions match across the repair. For polymeric sand, edge restraint, and geogrid, we use the best spec for the job – sometimes that’s the OEM accessory, sometimes an aftermarket product that handles Gilroy heat better. We’ll tell you which and why.
How long does Belgard repair work take in Gilroy?
A re-sand and re-compact of a patio or driveway typically runs one to two days once we’re on-site. A full wall rebuild with proper geogrid and drainage can take a week or more depending on the footing and permit timing. We’ll give you a straight timeline when we quote it. Call (833) 400-1314 for a free estimate and a real schedule.
How much does Belgard paver installation cost in Gilroy?
A paver driveway in Gilroy typically runs $7,000 – $18,000, and a paver patio $3,500 – $11,000, depending on base conditions, grade, and square footage. If you’re replacing an existing driveway, budget $5,000 – $14,000. For an exact number on your lot, call (833) 400-1314 and we’ll quote it free.
Service Areas Near Gilroy
Silver Line Contractors runs Belgard service throughout south Santa Clara County: Gilroy, San Martin, Morgan Hill, Interlaken, and across the county line into San Juan Bautista. We also cover Belgard service in San Martin and Belgard service in Aromas for smaller paver patios, wall repairs, and replacement driveways.
Book Your Belgard Service in Gilroy Today
If your Gilroy Belgard driveway is losing joint sand, your patio is showing efflorescence, or your retaining wall has started leaning, call us now. We’ll walk the site, tell you what’s actually wrong, and quote the fix. (833) 400-1314. Free estimates. Straight answers. Work that holds.
Written by Noel Carvalho, Owner & Gilroy General Contractor at Silver Line Contractors, serving Gilroy and south Santa Clara County since founding the company.