Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Redwood Shores, CA | Silver Line Contractors
We provide independent Mr-Glass construction service across Redwood Shores, handling frameless shower enclosures, sliding patio doors, and window systems in the 1980s-to-2000s housing stock that defines this bayfront community. We’re not a manufacturer-authorized dealer; we’re a General Contractor in Redwood Shores that works alongside Mr-Glass products every week, and the one thing that separates our work here from anywhere else is how much salt air and fill-soil settlement shape every install and repair. Call (833) 400-1314 for a free estimate on any Mr-Glass project in Redwood Shores.
Why Redwood Shores Residents Choose Us for Mr-Glass Service
Most Mr-Glass work in Redwood Shores falls into two buckets: original enclosures from the 1980s and 1990s that have spent thirty or forty years in onshore fog, or newer panels that were installed to spec but now bind because the engineered fill under the house has settled. We’ve handled both enough times to know exactly which hinges, clamps, and seals hold up here and which ones fail within three years. When a shower door sags on a slider or a patio panel won’t latch because the opening is out of square, the fix usually isn’t a new unit, it’s re-templating to the actual conditions.
We keep OEM Mr-Glass hardware and seals in stock where the original profile still matches, and we keep marine-grade stainless aftermarket parts for the pieces that were never built for bayfront exposure. Noel Carvalho founded Silver Line Contractors after years spent working every phase of residential builds across the Bay Area, and the first rule on our job sites is the same one his father taught him patching their family home in Gilroy: good work either holds or it doesn’t. We build for what Redwood Shores actually throws at a panel, not what the spec sheet assumes.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Redwood Shores
- Fogged, etched, or spot-pitted glass. Persistent onshore fog and humidity trap moisture between panes on older insulated Mr-Glass units, and the salt air slowly etches exterior glass surfaces on patio windows and doors. We re-glaze where the frame is sound, replacing only the failed glass rather than the entire assembly.
- Corroded hinges, clamps, and pivot hardware. Exterior fasteners on Mr-Glass shower and patio units degrade fast in marine air. We swap corroded hardware for marine-grade stainless and re-align the panel so it swings or slides cleanly again.
- Sagging or out-of-plumb sliding doors and shower panels. Fill-soil settlement under Redwood Shores homes shifts 1980s and 1990s framing by fractions of an inch over decades. That’s enough to make a Mr-Glass bypass door bind on its track or a frameless panel pull away from its wall channel. We re-template to the actual opening instead of assuming square framing.
- Water intrusion and mold behind enclosures. Original shower curbs and weep paths in older Redwood Shores bathrooms often weren’t sloped for the humidity levels here. Water pools, wicks into grout and drywall, and mold follows. We reset the curb with proper slope, rebuild the weep path, and set the Mr-Glass panel so drainage works with the floor, not against it.
- Failed seals around patio and window units. Wind-driven rain off the Bay finds every gap in an aging seal. We strip and replace perimeter seals on Mr-Glass sliding patio units and windows, using materials rated for salt exposure rather than standard residential stock.
Mr-Glass Service in Redwood Shores: What Local Conditions Mean for Your Equipment
The single biggest factor in Redwood Shores that a contractor offering San Carlos Mr-Glass service or working in Belmont rarely sees is what’s under the slab. This entire community was built as engineered fill over former tidal marsh, and that fill keeps settling, slowly and unevenly, decades after the homes went up. We’ve opened up shower surrounds on townhomes off Redwood Shores Parkway and found curb lips that have drifted a quarter-inch out of level over the bay mud. A Mr-Glass panel that fit perfectly at install in 1995 can bind at the hinge or leak at the bottom track by 2025, not because the hardware failed but because the house moved around it. Because the whole community also runs on shared private storm systems and HOA-governed architectural review, drainage and exterior modifications often require more paperwork than the same job would in Foster City. We template to actual conditions on every Redwood Shores job, and we plan for shared infrastructure constraints from the first site visit, not the third.
Mr-Glass Models & Products We Service in Redwood Shores
We service the full range of Mr-Glass products installed across Redwood Shores homes and offices, including frameless tempered shower enclosures, semi-frameless bypass shower doors, sliding glass patio and window units, and custom-cut mirrors and glass shelving. Our parts approach is straightforward: OEM Mr-Glass hardware and seals where the original profile still matches, and quality aftermarket stainless hardware where OEM parts are discontinued or under-spec for marine exposure. We stock the most common hinge, clamp, and seal profiles locally so most Redwood Shores repairs don’t wait on a parts order. If the frame is still solid and only the glass or hardware has failed, we re-glaze or re-hinge rather than push a full replacement.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Redwood Shores
What drives cost on Mr-Glass work in Redwood Shores is scope: a hardware swap on an existing enclosure runs far less than a full frameless panel replacement, and a walk-in shower build runs more than a tub-to-shower conversion because of the curb, pan, and waterproofing work involved. Every free estimate includes a site assessment, measurements templated to the actual opening, and a written line-item quote so you see exactly where the money goes before we start.
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Window Replacement | $4,500 – $15,000 |
Call (833) 400-1314 to schedule your free estimate. We’ll walk the site, check the actual conditions, and give you a number that holds.
Serving Redwood Shores, CA — Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Redwood Shores
No. Silver Line Contractors is an independent general contractor that installs, services, and repairs Mr-Glass products. We are not manufacturer-affiliated or authorized. That independence means we can use the best parts for Redwood Shores conditions, including marine-grade stainless where OEM hardware was never built for salt exposure. For more on how we work with the brand, see our Mr-Glass sales & service page.
Between-pane fog on Mr-Glass units in Redwood Shores is almost always a failed seal, and the bayfront climate accelerates it. Constant onshore fog and humidity mean any seal breach pulls moist air into the cavity, which condenses on the glass and eventually etches it. The fix is re-glazing the unit with new tempered glass and fresh seals. Call (833) 400-1314 and we’ll confirm the cause and quote the repair.
Most hardware swaps and re-alignments finish in half a day. Re-glazing a fogged insulated unit or converting a tub to a walk-in shower takes longer, generally one to three days depending on demolition, waterproofing, and panel templating. We’ll give you a firm schedule on the estimate, not a vague window.
We service frameless tempered shower enclosures, semi-frameless bypass doors, sliding glass patio and window units, and custom mirrors and shelving. If you’re in the wider Redwood Shores service area and have a Mr-Glass product that needs attention, call us and we’ll tell you straight whether it’s worth repairing.
Depending on the work, Mr-Glass service here runs from around $3,000 for a shower replacement or panel swap up to $12,000 for a full walk-in shower build with waterproofing and a new curb. Window replacement typically lands between $4,500 and $15,000. The spread depends on glass size, hardware condition, and whether fill settlement has shifted the framing. Call (833) 400-1314 for a free, exact quote, no charge for the visit.
Service Areas Near Redwood Shores
We also serve the communities around Redwood Shores, including Belmont, Foster City, San Carlos, and the broader Redwood City area. If you’re in Mr-Glass service in Belmont or Mr-Glass service in Foster City, the same crew and the same marine-grade parts approach apply. Call us and we’ll route your job to the nearest available team.
Book Your Mr-Glass Service in Redwood Shores Today
Good construction doesn’t need a sales pitch, the work explains itself. If you have a Mr-Glass enclosure, patio door, or window that’s fogged, binding, or leaking in Redwood Shores, call (833) 400-1314 to schedule your free estimate. We’ll assess it, quote it straight, and fix it right.
Written by Noel Carvalho, Owner & General Contractor at Silver Line Contractors, offering Home Remodeling in Redwood Shores and serving the surrounding Bay Area.