Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Bruno, CA | Silver Line Contractors
We provide independent CWS cabinet and vanity service across San Bruno and nearby, including CWS service in Millbrae, from the fog-belt slope lots above El Camino to the rebuilt blocks of Crestmoor. The one thing that makes our CWS work here different is that almost every job is a swap inside an existing footprint, so we re-check plumb and square against a 1950s floor plate or a 2010s rebuild before a single box goes in. At Silver Line Contractors, we’re not authorized by CWS, but our crews work on these units every week and know exactly which failure modes show up in marine-fog housing stock. Call (833) 400-1314 for a free estimate.
Why San Bruno Residents Choose Us for CWS Service
We know CWS cabinetry the way a San Bruno homeowner knows the SFO flight schedule: by daily exposure. Our founder, Noel Carvalho, grew up in Gilroy’s south end watching his father patch and improve their family home, then studied construction technology at Gavilan College before spending years working residential and commercial builds across Santa Clara County. That background means our crews don’t read a factory service script and start replacing parts. We open the box, check the carcass, and tell you honestly whether a run of CWS Bristol maple base cabinets is worth refacing or too far gone. For CWS sales & service across San Bruno, we cover the 94066 zip end to end, from the mid-century ranchers near San Bruno Avenue to the newer infill near the Bayhill corridor. We stock CWS-compatible OEM door and drawer hardware locally, so we’re not waiting on a distributor for basic hinge and glide replacements.
Styles & brands we work with
Common CWS Construction Problems We Solve in San Bruno
Here’s what we actually find when we open CWS cabinet runs in San Bruno kitchens:
- Moisture-swollen MDF and particleboard box panels near sink runs and exterior walls. San Bruno sits in the fog-cooled gap between the Bay and the Pacific, so exteriors take constant marine moisture. In a 1940s stucco-over-wood-frame rancher with no wall insulation, that condensation works its way into the cabinet boxes next to the sink run and swells the panels from the inside out.
- Face-frame joints and drawer-box glue lines separating seasonally. The fog-cooled swings push wood in and out all year, and original CWS cabinets from the 1950s and 60s didn’t always get the joinery needed to survive thirty years of that cycle. We re-glue and re-clamp where the wood is sound, and replace where it isn’t.
- Sagging or delaminating toe kicks and cabinet bottoms on unleveled floor plates. Original 1950s floors that were never leveled, plus Crestmoor rebuilds from the 2010s with different slab elevations on the same street, mean a CWS cabinet run can sit on a floor that’s visibly out of plumb. The boxes rack, the toe kicks crack, and the doors start binding.
- Blistered or peeling thermofoil and painted finishes on exterior-facing doors. Cabinet doors placed on exterior walls collect condensation in the fog belt. Thermofoil lets go first, then painted MDF starts peeling at the edges. We reface when the substrate is dry and sound.
- Mismatched hardware from previous handyman repairs. When a Crestmoor rebuild sits next to an original 1950s rancher, we sometimes see CWS runs that got patched with whatever hardware was on the shelf. We bring the hardware back to OEM-compatible spec or a quality aftermarket match, and we tell you which it is before we install it.
CWS Service in San Bruno: What Local Conditions Mean for Your Equipment
San Bruno is fully built out. There’s no greenfield land left, so almost every CWS kitchen or vanity job here is a swap inside an existing footprint. That sounds simple until you realize what it means for cabinet installation: our crew has to re-check cabinet plumb and square against a 1950s floor plate or a 2010s Crestmoor rebuild in the same block before a single box goes in. On a small two-story rancher off the Crestmoor slope side, our tech opened a run of CWS Bristol maple base cabinets and found the sink-side box panels swollen from years of fog-driven condensation and a floor plate that had never been re-leveled after the home was rebuilt. We replaced the water-damaged boxes with OEM-matched carcasses, shimmed the run plumb, and refaced the sound doors and drawer fronts, then added a sealed toe-kick and a small island to close the galley layout. The owner got a squared, dry kitchen instead of a full tear-out, and the new vanity box in the hall bath went in on a sealed, leveled plinth for the same reason. That’s the difference between a cabinet pitch written for anywhere and CWS service that actually reflects San Bruno’s mixed-vintage, fog-belt housing stock. For more on where we work, see our San Bruno service area page.
CWS Models & Products We Service in San Bruno
We work on the CWS lines that actually show up in San Bruno homes: the Bristol and Bristol Maple cabinet series, Newport Shaker-style kitchen cabinets, CWS bathroom vanities and linen cabinets, and full base, wall, and tall pantry cabinet runs in standard 1950s – 60s San Bruno kitchens. When a replacement part is still made, we use CWS-compatible OEM door and drawer hardware. When the OEM line is out of production, we use a quality aftermarket alternative and tell you before we install it. When box panels are sound, we reface and re-hinge. When the carcass is swollen or delaminated from moisture, we replace rather than chase a repair. Good construction doesn’t need a sales pitch – the work explains itself.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Bruno
Pricing depends on the condition of your existing boxes, the cabinet line you have, and whether we’re refacing or replacing. Here are the ranges we quote most often in San Bruno:
| Service | Typical Range |
|---|---|
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
What drives the cost is whether the boxes are structurally sound enough to reface, or whether moisture has gotten into the MDF and particleboard and we’re replacing carcasses. The free estimate includes opening the cabinet runs, checking plumb and level against your floor plate, and a written line-item quote. Call (833) 400-1314 to schedule yours.
Serving San Bruno, CA — Our Local Coverage Area
We’re based in the San Bruno area and know this community well, and we also offer our General Contractor in San Bruno services nearby. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Bruno
Generally no, not for a direct cabinet swap or reface in the same footprint. The second you move plumbing, relocate a sink run, or change the kitchen’s electrical layout though, San Bruno’s building department will want plans. We pull permits when the scope calls for it and we’ll tell you at the estimate whether yours does.
Yes, if the boxes are MDF or particleboard and they’re sitting against an exterior wall with poor insulation. San Bruno’s fog-cooled coastal air — similar to what we see during CWS repair in Pacifica — drives condensation into those panels, especially near sink runs. We add sealed toe-kicks, moisture barriers where the run meets an exterior wall, and proper ventilation to slow it down, but the original 1940s – 1960s construction is the real variable. Call (833) 400-1314 and we’ll check your specific run.
We can, and we do it regularly. The Crestmoor area was rebuilt block-by-block after the 2010 PG&E gas pipeline explosion, so you’ll see a 2010s-era rebuild next door to an original 1950s rancher with mismatched foundations and grading on the same street. We match the door style and finish to the existing CWS run, and we re-level the boxes to whatever the floor plate is actually doing. It’s the only way to get a clean result on those mixed-vintage blocks.
Usually, yes. If the boxes are sound, refacing runs about 40 – 60% of a full replacement because we’re keeping the carcasses and replacing doors, drawer fronts, and hardware. In a small San Bruno galley, that’s often the difference between a $6,000 refresh and a $14,000 tear-out. We’ll open the boxes and tell you which one your kitchen actually needs.
In San Bruno, a bathroom vanity installation runs $800 – $3,000, while cabinet installation in a small kitchen runs $4,000 – $13,000, and a full small kitchen remodel with counters and backsplash lands between $9,000 and $20,000. The spread depends on whether we’re refacing or replacing and what condition the existing boxes are in. Call (833) 400-1314 for an exact quote – estimates are free.
Service Areas Near San Bruno
We work across San Bruno and the surrounding Peninsula, including South San Francisco, Millbrae, Pacifica, Daly City, and the northern Santa Cruz Mountain foothill communities. We also serve CWS service in Montara along the coast, and CWS service in South San Francisco across the 101 corridor for homeowners who’d rather have one contractor on the whole scope.
Book Your CWS Service in San Bruno Today
If your CWS cabinets are swelling, sagging, or just tired, call (833) 400-1314. We’ll open the boxes, check the floor plate, and give you a straight written quote for refacing or replacement. Free estimates across San Bruno, the 94066 zip, and CWS service in Brisbane.
Written by Noel Carvalho, Owner at Silver Line Contractors, serving San Bruno and the Peninsula with independent CWS cabinet and construction service.